MAIN FEATURES
Level 2 AC Charger
Current: Max 19.2 kW (80A)
Output: SAE J1772 Type 1
Operating temperature: -30 ~ 55°C / -22 ~ 131°F
START CHARGING
Option 1. Plug and Charge
-
Insert the charging plug into the EV
- Charging session starts
Option 2. Using a RFID card (Optional- Depends on the charger/location settings)
- Insert the charging plug into the EV
- Swipe card
- Wait for authorization
- Charging session starts
Some EV chargers have a built-in RFID reader. If yours do, drivers can use RFID cards to transact. RFID cards are linked to the company or driver's account, enabling everything from automatic charger unlocking to credit card billing (if it's the case)
STOP CHARGING
- Unplug any time (disconnect the charging plug from the vehicle to stop the charging session)
- Session ended (please return the charging plug to the holster)
LOCKED CONNECTOR
In some cases, the EV locks the connector. To unlock the connector, obey the instructions for the EV. It may be necessary to unlock all doors of the EV, or use the ‘unlock charge connector button’ on the car key, if present.
STOPCharging will stop without user interaction:
• In case of alarm/hazard.
• When the battery is full, the charge session stops automatically.
• When the maximum charge time set by the operator/owner has been reached.
LIGHT INDICATORS:
Disclaimer: The content on this page is sourced from the manufacturer's manual. We do not own or claim any rights to this material. For complete and detailed information, please refer to the official manual.
DO YOU HAVE AN ISSUE THAT REQUIRES FURTHER ASSISTANCE?
Please, do not hesitate to contact us through:
- 7Gen Customer Support Portal. By clicking here you can find instructions on how to create an account within our support center.
- Email: support@7gen.com
- Emergency line / 24/7 Call Support: +1 855 743 6938